Broadband Coaxial Noise Sources
Noise Figure Measurement, Built-in Receiver testing, Freq: 1 MHz to 26.5 GHz

Broadband Coaxial High ENR Noise Sources
These Noise Sources, with their high ENR, are perfect for built in test situations where there is significant path loss between the output of the noise source and the receiver. Examples of this are where high directivity couplers are used to feed the noise signal into the receiver thus minimizing the receiver's noise figure with another being one noise source being fed into a multi-way power splitter for a receiver system with many elements.
NMA2218 Noise Figure Measurement, Built-in Receiver testing, Freq: 1 MHz to 18.0 GHz
NST10H Noise Figure Measurement, Built-in Receiver testing, Freq: 2 MHz to 10.0 GHz

Small Hermetic Hybrid Noise Sources
Receiver, Radiometer built-in test and calibration
Freq: 0.01 to 18 GHz
Outline Drawing Code W X

Microwave Noise Sources w Built-in Isolators
Micronetics, Inc. acquired the Solid State Noise Source line of Densitron Microwave Limited (DML) in March, 2003. Densitron was formally named Nore Microwave.

Waveguide Noise Sources
Freq: 12.4 to 110 GHz
Outline Drawing Code WG

Waveguide 77 GHz Noise Source
calibrated with isolators for easier, more accurate noise temperature testing for collision avoidance radars
Outline Drawing Code WG

    SERVICES - Calibration
Micronetics features a state-of-the-art calibration laboratory
 

NOIZEG Baseband Modules
A/D Dithering, Encryption, Base-band, BER testing, Jamming, Freq: 100 Hz to 5 MHz
Outline Drawing Code D

NMA 2000 Series Noise Modules
IF BER testing, Broadband Receiver calibration, A/D Dithering, Freq: 100 Hz to 2 GHz
Outline Drawing Code D T

NMA 2100 Series Noise Modules
Baseband/IF BER testing, Jamming Receiver calibration, A/D Dithering, Freq: 100 Hz to 1 GHz
Outline Drawing Code E T S

CNS7100 Series Coaxial Noise Modules
High Output SMA connectorized noise sources available from stock. Frequency range: 50 kHz to 500 MHz.

NMA 2500 Series Dual Bias Noise Modules
RF/IF BER testing, Jamming, Built-in frequency response test, Freq: 10 MHz to 8.5 GHz
Outline Drawing Code T S

NMA 5100 Series Noise Generators
RF/IF BER testing, Barrage Jamming, Built-in frequency response test, Eb/No, C/N Freq: 10 Hz to 18 GHz
Outline Drawing Code M T

NMA-WiFi
Series performs interference tests for 802.11a, 802.11b, and ISM products in general
Outline Drawing Code T S
 

SMN7105 100 kHz to 3 MHz ½" package hi-amplitude SMT noise source

SMN7106 10 kHz - 10 MHz ½" surface mount amplified noise source

SMN7108 50 kHz - 100 MHz ½" surface mount amplified noise source

SMN7109 5 MHz to 500 MHz ½" surface mount amplified noise source

NFP1003 100 MHz to 3 GHz hermetic surface mount microwave noise sources

SMN3110 100 kHz to 3.0 GHz Low Bias Voltage SMT Noise Source

SMN7114 100 MHz to 3.0 GHz Amplified Microwave SMT Noise Source

SMN3018 200 MHz to 6.0 GHz Very Small Broadband SMT Noise Source

NC500SM Series 200 kHz to 3.5 GHz Surface Mount Noise Source.

SMDM70 Dithering Modules 200 kHz - 2 MHz Contains all circuitiry for: Noise Biasing, Amplification, Low Pass Filtering and Combining with Analog Signal
 

Noise Diodes, ST Series Surface Mount Mini
A/D Dithering, Encryption, Built-in Receiver Test.
Outline Drawing Code Z

Noise Diodes, Traditional
Applications include A/D Dithering, Encryption, Built-in Receiver test, Freq: 10 kHz to 3 GHz
Outline Drawing Code G H Pa